Mist Blower Trailed High Wind Tower

A high specification range of British designed and built mist blower/atomizer trailed sprayers:- • The High Wind / Twin Fan / High Tower trailed mist blower sets new standards in the treatment of dense foliage, tall trees, vines, and hops • The ergonomic design and low centre of gravity of the tank range and chassis construction ensures ultimate stability • Even air distribution/precise application throughout the towers’ height is achieved by one fan delivering to the right and the other to the left • Operator friendly • Ease of use and servicing • Reliability • Readily available, next day parts Standard features include:- • Heavy duty hot dipped galvanised chassis/frame • Length adjustable, swivel 35mm eye drawbar • 15.0/55–17 wheels, 820 diameter wheels • Adjustable wheel track - tyre inside to inside minimum 840mm • 4.8 tonne axle, 6 x 18mm studs at 205 pcd, 160 hub • 2000 or 3000 litre polyethylene easy clean tank complete with efficient sump • Twin tank lids - 455 & 355mm diameter • Folding side step/footplate for easy access to tank lid • Wet contents sight tube on front and left hand side • Easily accessible 1½” main tank drain tap • Efficient in-tank agitation jets • Clean water system wash tank • 2 x in-tank washing heads • 15 litre operator hand wash tank • ½” high pressure stainless steel spray tubes • 10 nozzles, + 1 fully adjustable upper/top nozzle, on robustly constructed twin towers, 2.60 metres high • Dual 2-way 360o nozzle bodies • 2 sets of ceramic hard wearing ISO colour coded tips • Left and right hand spray tube pressure filters • In-cab electric master on/off • In-cab electric pressure regulation • In-cab electric left and right hand (2 section) spray on/off switching • Auto balanced return to tank irrespective of nozzle size • Main pressure filter • Large suction filter complete with isolation valve – enables filter cleaning with full tank • Suction hose • 540 rpm PTO driven 140 litre/min. 3 cylinder piston diaphragm pump • 1.5 metre transport width • Parking stand / jockey wheel • Hot dipped galvanised rear bumper bar protection • Heavy duty 2-speed gearbox with neutral and conveyor over- run • Front and rear intake twin 800mm fan assemblies, each with 10 x nylon/glass variable pitch blades